New Environmental and Conservation Research and Learning Centre
at Queen’s University Biological Station
Closing Date: August 1st, 2024 @ 3:00pm
Architect: Colbourne & Kembel, Architects Inc.
Closing: Please e-mail quotes to sean@ubcon.ca or fax to (613) 387-8482
Addendums: 1
PROJECT DESCRIPTION
A brief outline of the scope work for this project is provided below. This outline is meant to provide introductory information to make the proponents familiar with the project, however it is not exhaustive. As per drawings and specifications,
• Civil works including new fire fighting tanks, Barrier Free parking area, landscaping, geothermal field, Barrier Free ramps, connection to existing septic system
• Structural system composed of concrete foundation, wood framing with some concrete block walls
• Arch work includes an elevator, Barrier Free washrooms, wood deck and walkway, and a green roof system
• Mech system includes geothermal heat pumps, and lake water pumps and system for aquarium tanks
• electrical work includes a new transformer, new generator, fire alarm system, power, lighting and controls
SCHEDULE
Target Date to Commence Construction: Fall 2024
Target Date for Ready for Takeover: December 2025
TRADES
Division 00 – Procurement and Contracting Requirements
00 73 13 Supplementary Conditions
Division 01 – General Requirements
01 14 00 Work Restrictions
01 21 00 Allowances
01 29 83 Payment Procedures: Inspection & Testing Services
01 31 19 Project Meetings
01 32 00 Construction Progress Documentation
01 33 00 Submittal Procedures
01 35 35 Fire Safety Requirements
01 35 43 Environmental Procedures
01 45 00 Quality Control
01 51 00 Temporary Utilities
01 52 00 Construction Facilities
01 56 00 Temporary Barriers and Enclosures
01 61 00 Common Product Requirements
01 70 12 Safety Requirements
01 73 03 Execution Requirements
01 74 11 Cleaning
01 74 19 Construction/Demolition Waste Management and Disposal
01 77 00 Closeout Procedures
01 78 00 Closeout Submittals
01 79 00 Demonstration and Training
01 91 00 Commissioning
Division 02 – Existing Conditions
02 41 99 Demolition for Minor Works
Division 03 – Concrete
03 35 00 Architectural Concrete and Concrete Finishing
03 35 13 Concrete Polishing
Division 05 – Metals
05 50 00 Metal Fabrications
Division 06 – Wood, Plastics, and Composites
06 10 00 Rough Carpentry
06 20 00 Finish Carpentry
06 40 00 Architectural Woodwork
06 47 00 Plastic Laminate Finishing
06 73 00 Composite Wood Decking
Division 07 – Thermal and Moisture Protection
07 12 00 Bituminous Damp-proofing
07 21 13 Board Insulation
07 21 16 Blanket Insulation
07 26 00 Air and Vapour Retarders
07 33 63 Vegetated Roof Assembly: High Performance Built-up
07 42 46 Fibre Reinforced Cementitious Wall Panels & Siding
07 46 00 Aluminum Cladding Sub-framing system
07 46 15 Aluminum Siding & Soffits
07 54 23 Thermoplastic Polyolefin (TPO) Membrane Roofing
07 55 53 Elastomeric Protected Membrane Roofing
07 62 00 Sheet Metal Flashing & Trim
07 72 33 Roof Hatches
07 84 00 Firestopping
07 92 00 Joint Sealants
Division 08 – Openings
08 11 14 Metal Doors and Frames
08 14 16 Flush Wood Doors
08 33 00 Rolling Fire Shutters
08 54 13 Fiberglass Windows
08 71 00 Door Hardware – General
08 80 50 Glazing
Division 09 – Finishes
09 21 16 Gypsum Board Assemblies
09 22 16 Non-Structural Metal Framing
09 30 13 Ceramic Tiling
09 51 13 Acoustical Panel Ceilings
09 53 00 Acoustical Suspension
09 65 16 Resilient Sheet Flooring
09 65 19 Resilient Tile Flooring
09 67 30 Resinous Vinyl Chip Flooring
09 91 23 Painting
Division 10 – Specialties
10 26 00.01 Wall and Corner Guards
10 28 10 Toilet & Change Room Accessories
10 29 10 Manufactured Specialties
Division 12 – Furnishings
12 21 13 Cassette Equipped Roller Shades
Division 14 – Conveying Equipment
14 24 00 Machine Room-less Hydraulic Passenger Elevators
Division 21 – Fire Suppression
21 05 01 Mechanical General Requirements
21 12 02 Fire Extinguishers and Safety Blankets
Division 22 – Plumbing
22 07 00 Plumbing Insulation
22 10 10 Pumps
22 11 18 Water Supply, Piping – Copper
22 13 17 Drainage Waste and Vent Piping
22 33 00 Domestic Water Heater
22 42 01 Plumbing Specialties and Accessories
22 42 02 Plumbing Fixtures
Division 23 – Heating, Ventilating and Air Conditioning
23 05 29 Hangers and Supports for Piping and Equipment
23 05 48 Noise and Vibration Control
23 05 54 Mechanical Identification
23 05 93 Testing, Adjusting and Balancing
23 07 13 Ductwork Insulation
23 07 14 Thermal Insulation for Piping
23 21 14 Hydronic Specialties
23 21 16 Hydronic Systems Steel
23 21 23 Hydronic Pumps
23 25 00 HVAC Water Treatment
23 31 14 Ductwork – Low Pressure Metallic to 500 PA
23 33 00 Ductwork Accessories
23 33 46 Flexible Ducts
23 33 53 Duct Liners
23 37 13 Diffusers, Registers and Grilles
23 53 00 Variable Frequency Drive
23 55 01 Electric Duct Coil
23 72 13 Heat Recovery Ventilators
23 81 40 Heat Pumps
23 83 15 Earth Loop System
Division 25 – Integrated Automation
25 90 00 Temperature Controls
Division 26 – Electrical
26 01 00 Electrical General Requirements
26 05 00 Basic Materials and Methods
26 05 26 Grounding
26 05 35 Telecommunication Raceway System
26 24 01 Service
26 24 16 Power Distribution System
26 27 00 Transient Voltage Surge Suppressors
26 27 26 Wiring Devices
26 28 23 Disconnect Switches
26 33 00 Power Generator – Diesel
26 36 23 Low Voltage Bypass/Isolation Automatic Transfer Switches
26 50 00 Lighting Equipment
26 52 00 Emergency Lighting System
26 54 00 Lighting Control System
Division 27 – Communications
27 00 00 Communication Systems
Division 28 – Electronic Safety and Security
28 31 00 Fire Alarm System
Division 31 – Earthwork
31 05 17 Aggregate Materials
31 11 00 Clearing and Grubbing
31 14 13 Soil Stripping and Stockpiling
31 23 10 Excavating, Trenching and Backfilling
31 23 13 Rough Grading
31 23 16 Rock Removal
31 32 21 Geotextiles
Division 32 – Exterior Improvements
32 11 18 Granular Base (Granular ‘A’)
32 11 19 Granular Sub-base (Granular ‘B’, Type II)
32 13 15 Concrete Walks, Pads, Curbs and Gutters
32 91 21 Topsoil Placement and Grading